Autowatch Ghost Immobiliser Installation
The Ghost is the most advanced aftermarket in the UK. CAN bus immobiliser. It's discreet It does not include LED indicators or key fobs and is hidden within the wiring of the vehicle.
The user can also deactivate the system temporarily using Transport Mode when renting their car. This guide will guide you through the installation process of an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a modern security device that guards your vehicle against key cloning, hacking and relay attacks. The system is directly connected to your vehicle's ECU and is protected by a unique PIN code that you choose. how to install ghost immobiliser is inaccessible to thieves using scanners for diagnostics or other modern methods, and is unable to be disabled by circuit cuts.
The system is simple to use, however it is essential to have a professional installation to ensure a smooth and secure connection to your vehicle's ECU. Installers certified by Thatcham can assist you with the installation and programming of your Ghost system. They can also suggest a tracking system or alarm to complement your vehicle's protection package.
First, the installer must disconnect your battery to prevent the possibility of airbag deployment and short circuits. Once the battery is disconnected, the installer can safely begin working. Basic hand tools can be used to ensure precise connections. A multimeter can be used to check electrical values. Insulation tape and cable tie are crucial to ensure connections are secure and keep wiring neat. The user's manual gives specific guidelines that are specifically tailored to your Ghost Immobiliser model.
During the installation, it is essential to choose the right grounding location that is free of debris and paint. Installers must also ensure that the immobiliser's wires CAN H and CAN L are connected to the appropriate ECU ports. These wires can be connected or soldered, depending on the model. A top-quality connector is recommended to ensure a durable and reliable connection.
Transport Mode can be activated by the customer after the installation is completed. This permits mechanics or valet parking to use the vehicle, without having to know the pin code. To accomplish this, the customer must hit the button for service on the dashboard 5 times in a matter of 2 seconds. The system will confirm this by showing 5 indicators.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA certified and Thatcham approved. It's a great option for anyone who regularly rents out their cars on platforms such as Turo. Immobilisers can lower insurance costs, since it reduces the risk of theft.
Getting Started
It's not difficult to come up with an autowatch immobiliser if you want to protect your vehicle from theft. It will stop your car from starting even if a criminal steals or copies the key. It is possible because of its advanced technology that stops the engine from starting until the right PIN code is entered.
The device connects to the CAN bus network of your vehicle, allowing it to communicate with the ECU directly. It makes use of the buttons on your dashboard and steering wheel to create a unique sequence, that only you can understand. This makes it impossible for anyone else to start your car. This is the best security system that protects your car's pride and joy and will ensure its value when you want to sell it in the future.
Installing a ghost immobiliser is a simple process, but it's important to follow the directions carefully to avoid problems with the electrical system and malfunctions. You'll need to find a 12V power source and a solid grounding on the chassis of your car. Then, you'll be able to begin connecting the wires to the immobiliser. Be sure to use high-quality connectors and soldering methods to ensure a solid connection. Insulate the connections using heat shrink tubing, insulation tape or other materials to prevent short circuits in electrical power.
Once the wires are connected, you can reconnect the battery and turn on the engine to test the immobiliser's functionality. After you've verified that everything is functioning properly then you can put the immobiliser in a safe position inside the vehicle. Be sure to conceal it in a secure manner to ensure that thieves cannot get it into a compromising position.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified This means it meets the highest standards of security and is a fantastic protection against car thieves. It provides superior protection against key cloning, hacking, and relay attacks. It cannot be disabled without knowing the code. The device is easy to use, and can be set up to the service valet setting to ensure that your vehicle will not be activated if you bring it for an MOT or service.
Wiring
The Ghost Immobiliser, a cutting edge security system, is designed to prevent vehicle theft. It connects directly to your vehicle's CAN bus and communicates with the ECU which makes it virtually undetectable to your car. The Ghost Immobiliser will not interfere with your vehicle's factory settings unlike other aftermarket systems that require the removal of circuit elements.
It's also totally undetectable by thieves using diagnostic scanners. This is due to the fact that it does not transmit and receive radio frequency signals and it utilizes the CAN data format to communicate with your ECU. In addition, it doesn't need any modification to your vehicle's existing key fobs.
To utilize the Ghost Immobiliser, simply switch on the ignition in your car and then enter the sequence to disarm (either one or two buttons). The indicator will flash twice to verify that you have entered the correct code. You are now able to start your vehicle and drive safely.
Once installed, the Ghost Immobiliser will safeguard your vehicle from key cloning and hacking, while protecting the value of your car's pride and joy. In Transport Mode, you can temporarily disable the Ghost Immobiliser in case you need to give your car over for service or valet parking.
You'll need a constant power source (12V) and a grounding point to complete the installation of a Ghost immobiliser. Be sure that both are well-insulated and able to be touched. It is also recommended to use cable ties to bundle and secure the wires, since this will decrease the chance of tampering by potential thieves. To avoid mistakes, make sure to double-check these points and mark them using a label or tape. It's recommended to check all connections for signs of wear and tear. Make sure that all connections are firmly in place, and properly sealed. Don't forget to test the Ghost Immobiliser after the installation is complete. This will make sure that the unit is functioning correctly and that all connections are safe and well-insulated. Make sure to address any problems immediately.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that works seamlessly with your car's ECU to stop the motor from starting without authorization. Its innovative technology safeguards your vehicle against hacking and key cloning along with other methods used by thieves to steal vehicles. The Ghost is a perfect complement to existing tracking and alarm systems to offer the ultimate security for your vehicle. The Ghost's unparalleled features and subtle design make it a preferred choice for car lovers and security-conscious motorists alike.
In order to ensure that the Ghost Immobiliser is properly integrated the Ghost Immobiliser, it is essential to follow the steps of the installation procedure. Refer to the wiring diagram of the vehicle as it will aid you in locating and connecting the wires. The next step is to identify the power source and grounding points. Once you've found them you'll need to mark them so that they are easy to locate during the installation process. It is essential to use top-quality materials and tools. Basic hand tools can help with making precise connections and a multimeter can confirm electrical values and guarantee security. Cable tie and insulation tape will keep all connections neat. A Ghost-specific user manual is also available.
Before beginning the installation it is important to test the system by entering the PIN code, then starting the vehicle. This will ensure that the immobiliser functions as intended, preventing unauthorised vehicle starts. It's recommended to perform this routinely as part of your regular inspections of the vehicle to ensure the system is always functioning properly.
After the installation is completed After the installation is completed, you are able to drive your car with confidence. The Ghost will protect your car from potential car thieves. It will ensure that no one is able to escape with your car without having the correct PIN code. The Ghost can also be linked with a tracker that is approved by Thatcham to detect any attempts to tamper with or steal your vehicle and allow you to track your vehicle in the event of it being stolen.
The Ghost is compatible with a wide variety of vehicles, including those from most major manufacturers. If you're looking to secure your vehicle with this innovative device, contact Monty's Locksmith today to find out more about our installation and service options. We are a TASSA registered installer, which assures us that we follow strict guidelines for the installation of our products. This assures insurance companies, customers and law enforcement officials that installations are done safely and correctly.